Touchscreen battery management system iManager - 12 V / 150 A

Description

iManager is the innovative management system for all batteries and energy requirements on board, which above all avoids the "permanent parallel connection" of batteries. It manages up to three batteries simultaneously or separately, even with different technologies and amperages, thus improving performance. Thanks to the automatic battery cut-off function, it preserves the service life of the batteries. The touch display shows all available information, both on the state of charge of the batteries and on the use of the batteries.With a simple touch, the batteries to be activated or deactivated can be selected manually for fully personalized management.iManager constantly monitors the battery voltages and automatically selects the battery to be used, taking into account the charging and discharging currents, with the aim of keeping all the batteries at the same state of charge and thus optimizing their performance.Installing two body batteries in complete safety, avoiding the obsolete and inadvisable parallel operation, requires an electronic device to manage the system. With iManager you can install different batteries for: Technology (lead-acid, gel, AGM), power and different age of the battery.Further specifications of the "Black Box":Nominal voltage: 12 V (9-18 V)Max. Battery capacity per battery: 600 AhMax. Current consumption: 150 A (for 20 min.) / 100 A (continuous)Starter battery charge threshold: < 12.5 VBattery cut-off voltage: 10.5 VBattery cut-off temperature: 70 °CConsumption with battery connected: 8 mAConsumption with battery disconnected: 4 mAStarter battery fuse: 20 ABattery fuse max.: 120 AOperating temperature: -15 °C to +65 °COther display specifications:Nominal voltage: 12 VConsumption max. Brightness level: 86 mADisplay standby consumption: 38 mAConsumption when battery is disconnected: 8 mADisplay type: LED TFT 2.83", 262000 colors, touchscreenOperating temperature: -10 °C to +70 °C

• Automatic or manual management of one or two body batteries, even with different technology and amperage
• Dedicated output for recharging the car battery when the body batteries are 100% charged (e.g. in the garage)
• Displays the charge status of the batteries
• Displays voltage and charging and discharging amperes
• Display of date and time
• Automatic battery cut-off (below 11V) or manual, via touch display
• Display of information and advice on battery management and maintenance
• Temperature control during charging/discharging for increased safety
• Black box / display connection possible both via cable (cod. iM 12-150) and wireless (cod. iM 12-150W)