High voltage unit Marder STOP & GO with ultrasound Type 8 Plus - Minus CLIP

Description

Clip contact – no vehicle electrical system connection – super-flat slimline design

Minimum effort, maximum flexibility! Full protection with just one clip – STOP&GO makes it possible! High-voltage ultrasonic combination device with six PLUS-MINUS CLIP stainless steel contact plates. Independent of the vehicle electrical system, therefore particularly suitable for alternative drives. The clip attachment option for the double-pole stainless steel contact plates also makes installation easier and offers even more flexibility, especially for engine compartments that are becoming increasingly compact. This clip-on version now makes it possible to install additional contact plates at a later date on any point of the high-voltage cable, or to add an extension through an additional contact plate, specifically for large engine compartments such as in SUVs and motorhomes. The connection to terminal 15 has been replaced by sensor technology. Thanks to a contact slide attached directly to the device, there is no longer any need to install a bonnet contact switch. 

Highly recommended before taking any marten defence measures – STOP&GO scent mark remover.

• Battery mode
• Sensor technology
• Power consumption: approx. 0.4 mA
• Runtime up to 18 months
• 6 clip stainless steel contact plates with plus and minus pole 
• 2 waterproof piezo speakers
• Coverage radius: 360°
• Dispersion angle: > 170°
• Sound pressure: approx. 110 dB
• Frequency modulation against habituation
• Function indicator light, flashing LED
• Waterproof according to IP65
• Anti-panic circuit
• Also for house and carport
• E1 mark from the KBA (Federal Motor Transport Authority)

Which high-voltage contact plate do I need for my vehicle?

STOP&GO - single POSITIVE stainless steel contact plate
In order to be able to trigger an electric shock, a positive and a negative pole is required. The positive pole is provided by the STOP&GO high-voltage stainless steel contact plate, the negative pole by the vehicle body, for example. When it simultaneously touches the stainless steel contact plate and the earth contact of the vehicle body, the marten therefore receives a harmless but effective electric shock, similar to an electric fence.

 STOP&GO - double POSITIVE-NEGATIVE stainless steel contact plate
In modern vehicles, non-conductive plastic, insulating and damping materials are increasingly being used in the engine compartment. This means that the necessary earthing contact via the vehicle body is not always created and the marten may not receive an electric shock. That’s why the double stainless steel contact plate from STOP&GO has a plus and a minus pole. This means that an electric shock is guaranteed, regardless of the materials used in a vehicle’s engine compartment.

STOP&GO - double POSITIVE-NEGATIVE SKT stainless steel contact plate
With just one “click”, STOP&GO offers maximum protection and minimal installation time – all without screws. Unique on the market and only available from STOP&GO: the double stainless steel contact plate with plus and minus pole with sophisticated insulation-displacement contacts for modern vehicles. With this intelligent combination, it is now possible to lock and connect the stainless steel contact plate to the 2-core high-voltage cable with a simple “click”. In the process, a mandrel bores through the cable insulation when the contact plates are pressed together and ensures current transmission. The stainless steel contact plates have been correctly attached to the base if you hear a “click” when you press them together.

STOP&GO – double PLUS-MINUS CLIP stainless steel contact plate
With just one “clip”, STOP&GO offers maximum flexibility and minimal installation time – and all without screws: thanks to the double stainless steel contact plate with plus and minus pole and innovative clip attachment for modern vehicles. With this intelligent combination, the stainless steel contact plate is locked and connected to the 2-core high-voltage cable with a simple “clip”. This mounting allows any positioning of the contact plates and extension of the high-voltage cable, especially for large engine compartments of SUVs and motorhomes, for example.