Heating system Truma Combi 4 CP plus with iNet X

Description

Combi 4 CP iNet X Panel

Heat output: 4 kW
Efficiency: approx. 98%
Water content: 10 l
Heating time of the water tank (in hot water mode): approx. 23 min.
Power consumption for heating and hot water

• 12 V: heating: 1.2 - 6.5 A, hot water: 0.2 - 0.4 A
• 230 V: 3.9 - 7.8 A

Gas consumption: 160 - 335 g/h, 80 g/h at 1 kW average heat output

The Combi 4 is a space heater and water heater in one. The heater has a ten litre water tank: in winter, the water is simply heated as well, while in summer you can heat the water independently of the heating. The warm air flows into the interior through four air outlets – for a pleasant indoor climate. The Combi heater is almost silent and very economical.

What makes the Combi 4 special:

• FrostControl drain valve as standard
• Digital CP plus iNet ready control panel
• Extremely lightweight and compact, for flexible installation
• Automatic climate control in conjunction with Truma air-conditioning system

 You can easily control your Combi 4 using the digital CP plus control panel – or via the app. If you have a Truma air-conditioning system in the vehicle, you also have automatic climate control. For even more heating power, the Combi heaters are also available as an E variant with integrated electric heating elements.

Contents:
Heater (without exhaust duct or water connection set)
iNet X Panel
Connection cable
12 V connection cable
Instructions

Note: Either a water set FC TB (Art. No. 9927516) or a water set FC JG (Art. No. 9956895) must be ordered in addition.