E-kit Truma for heater VarioHeat

Description

The Truma E-Kit adds an electric heater to the Truma VarioHeat. Both devices are controlled via the Truma CP plus VarioHeat control panel or the Truma App.
The Truma E-Kit is installed in addition to the Truma VarioHeat. In this combination, gas, electric or mixed operation can be used for heating.

• Electric operation: Only the Truma E-Kit is used for heating at power levels of 900 or 1800 W. The warm air is distributed via the Truma VarioHeat
• Mixed operation: Start in gas mode then switch on electric mode. In combination with the Truma VarioHeat eco, a total output of 4600 W is achieved, and with the Truma VarioHeat comfort, 5500 W is achieved
• Practical: Easy to retrofit
• Variable: Can be installed upright or horizontally
• Connected: Easy to integrate into the Truma iNet system

• Power consumption at 12 V: 0.15 A
• Quiescent current: Level 1: 3.9 A; Level 2: 7.8 A