Awning fabric adapter Peggy Peg Fix&Go AntiFlap Contents 2 pcs

Description

Fix&Go AntiFlap awning clamps almost completely reduce the annoying 'flapping noise'. Simply slide the clamping device onto the side of the fabric, place it on existing rafters or spring rods from the awning manufacturer that are attached on both sides, turn the eccentric lever and close it by folding it over. The clamping pads hold the cloth in place without damaging it. Silicone tapes are then stretched around the rod and hooked into the corresponding grid hole, depending on the circumference of the rod. If you want more security, you can slide our optionally available TieStrap into the built-in piping rail. This is clamped in the piping rail by the eccentric lever during tensioning, so that the T-connector of the TieStrap cannot work its way out. Large awnings can of course be braced even better with several AntiFlap's on each side.
Fix&Go AntiFlap is compatible with almost all awning systems, regardless of whether they have round, oval or square rafter poles.

Required:
2 rafters from the awning manufacturer, optional TieStrap Peggy Peg

Contents:
2 pcs